Electrical Nail Drill Machine for Manicure Polishing

No matter for professional studio or personal use， such electrical nail drill machine is an ideal choice， which could be used both for pedicure and manicure. The special design of variable speed would provide you more convenience.

Specifications:

• Power: Single Phase， 220V/50-60Hz， Double Insulated.
• RPM: Single speed: 13，000; Variable speed: 3，000-13，000
• Collet: Collets Type: 2.4 or 3.2mm; Spring Chuck Type: 0.3-3.2mm
• Dimensions: 160mmL×24mm Diameter
• Quantity: 1set [1 nail drill machine， 1 AC adaptor， a bag of bits (6 pcs)]
• Color: red
• Package: well-packed (An English manual included)
• The connector with two round pins， but pls rest assured that we would send a charger adapter according to each country.
• Brand new and unused.

Operations:

• This tool is designed for carver， engrave， rout， grind， sharpen， sand， polish， drill and more.
• Unplug the tool from electrical outlet before loading a bit.
• [Collet Type]Press shaft lock button. Use the collet wrench to ollsen the collet nut. Inset the bit， and tighten the collet securely. But avoid excess tightening of the collet nut and never use a damaged bit.
• [Spring Chuck Type]Press shaft lock button. Unscrew the spring chuck counter-clockwise to loosen by hand. Place bit into the spring chuck. Hand tightens the spring chuck.
• [Single Speed Mode]There is an ON-OFF switch. When the switch is on， the tool runs at 13，000 RPM.
• [Variable speed mode]There is a switch indicator with an orange line on it. Slide the switch to find the speed needed from 3，000-13，000 RPM. For complete stop. Be sure slide the switch to the black dot.
• Slower speeds usually are best for polishing operation. Higher speeds are better for carving， drilling， cutting， routing and shaping. Hardwoods， metals and glass require high-speed operation.
• The tool should be grasped like a pen or pencil.
• Gently touch the work piece， letting the tool do the work. Keep hands and fingers away from rotating bit. The tool operates at speeds up to 13，000 revolutions per minute， just simply hold and guide it. Do not press the tool too much.
• When finished， turn off the tool and unplug it.