OBD II OBD2 OBD 2 USB Diagnostic Code Reader Scanner

OBD-ⅡSoftware is a free program that allows you to use your PC and a hardware interface to get the information from your car’s computer. The program is very user-friendly， easy to learn and easy to install. Simply extract the files into a folder on your computer’s hard drive and you’re ready to go. To uninstall the program， simply delete the entire contents of the folder where the program resides. The software supports two platforms: DOS and Windows.

Based on the latest PC scan， the OBD Ⅱ USB car scanner could connect to your PC or laptop via USB， and could work with all OBD-Ⅱ compliant vehicles， including the VPW， PWM， ISO， KWP 2000 and CAN protocols. It could read and clear any problems in your vehicle by reading the Diagnostic Trouble Codes/DTC’s， clear DTC and reset MIL/check engine light. It could support the latest vehicles with the new can bus protocols. USB connection allows it could be supported by wider range of computers. Power is supplied by the OBD port， while LEDs indicate power and show communication status.

DTCs are codes stored by the vehicle’s computer system when a vehicle issue occurs. Each DTC represents a particular vehicle issue which is used as a guide to locate the root cause in order to help you to fix the vehicle.

Compatible protocols:

• SAE J1850 PWM (41.6 kbaud)
• SAE J1850 VPW (10.4 kbaud)
• ISO 9141-2 (5 baud init， 10.4 kbaud)
• ISO 14230-4 KWP (5 baud init， 10.4 kbaud)
• ISO 14230-4 KWP (fast init， 10.4 kbaud)
• ISO 15765-4 CAN (11 bit ID， 500 kbaud) 
• ISO 15765-4 CAN (29 bit ID， 500 kbaud) 
• ISO 15765-4 CAN (11 bit ID， 250 kbaud)
• ISO 15765-4 CAN (29 bit ID， 250 kbaud)
• ISO 15765-4 CAN (29/11bit ID， arbitrary baudrate)
• SAE J1939
• This car diagnostic tool could be workable with the following models:
• Benz 2001/02/03 W203 C200K (ISO)
• BMW X5 2002 (ISO) Chevrolet Aveo (ISO)
• Citroen C3 2004 (ISO) Daihatsu YRV 2005 (ISO)
• Daihatsu YRV Turbo 2006 (ISO)
• Fiat Tipo 2002 (ISO)
• Ford New?ocus 2006(CAN)
• Honda Accord 2006 JDM (ISO)
• Honda Accord Euro R 2004 JDM (ISO)
• Honda City GD8 (ISO)
• Honda Civic ES 1.6A (ISO)
• Honda Integra Type R DC5 JDM (ISO)
• Honda Jazz 1.4M (ISO)
• Hyundai Accent 2004 (ISO)
• Hyundai Getz 1.3A 2004 (ISO)
• Hyundai Getz 1.6M 2004 (ISO)
• Hyundai Matrix 2004 (ISO)
• Hyundai Santa Fe 2.4A (ISO)
• Hyundai Sonata GLS (ISO)
• Hyundai Sonata 2005 (ISO)
• Hyundai Tuscani FX (ISO)
• Kia Carens 2005 (ISO)
• Kia Magentis 2005 (ISO)
• Kia Rio LS (ISO)
• Kia Sorento SUV 2005 (ISO)
• Lexus es300 Mazda 2 (CAN)
• Mazda 5 (CAN)
• Mazda 6 (CAN)
• Mazda Premacy 2001 (ISO)
• Mazda RX8 (CAN)
• Mitsubishi Colt 2003 (ISO)
• Mitsubishi Colt Plus 2005 (ISO)
• Mitsubishi Eclipse(GST-----1995/2000 Turbine Cars; RS/GS----1994-1996 GS; 1996-2000)
• Mitsubishi Lancer Evolution IX 2006 (ISO)
• Mitsubishi Pajero 3.5 V6 2006 (ISO)
• Nissan Sunny B14 (ISO)
• Nissan Sunny VIP FB15 (ISO)
• Nissan X-Trail 2.0L 2004 (ISO)
• Nissan X-Trail 2.5L 2004 (ISO)
• Peugeot 206 2001 –just could indicate RPM
• Peugeot 206 (ISO)
• Peugeot 307 (ISO)
• Peugeot 407 (ISO)
• Renault Megane II 2005 (ISO)
• Renault Kangoo 2006 (ISO)
• Subaru Impreza 1.6TS 2002 (ISO)
• Subaru Impreza WRX 2005 (ISO)
• Toyota Camry 2.0A 2004 (ISO)
• Toyota Camry 2.4A 2005 (ISO)
• Toyota Corolla Altis 1.6A 2005 (ISO)
• Toyota Corolla GLXi G8 1999 (ISO)
• Toyota Corolla G9 2002 (ISO)
• Toyota Vios 2004 (ISO)

This diagnostic tool couldn’t be workable with the following models:

• Mazda 323 Protege 2003 (OBD-I)
• Mitsubishi Lancer 1.6M 2006
• Nissan Sunny (N16)
• Nissan Cefiro (Teana) 2005
• Nissan sentra 1.8 2000/2005
• Nissan Cefiro (Teana) 2005
• Proton Perdana V6
• Subaru Legacy GT 2005
• Toyota camry 2002
• Toyota Wish JDM (Missing Pin 5 in DLC)
• Toyota IST JDM (Missing Pin 5 in DLC)
• Toyota altis 1.8 2004
• Peugeot 206 2000
• Suzuki Jimny 1.3 2000

Note: Only the vehicles which have a 16-pin DLC/Data Link Connector under the dash could be compliant to OBD Ⅱ. The Vehicle Emission Control Information Label must state that the vehicle is OBD Ⅱ compliant.

Specifications:

• OBDⅡ V1.3 and FTDI USB to serial chipset
• Baud rate: 38400
• Operating voltage: 12V
• Nominal idle current: 45mA
• Adaptor or batteries are not needed， for it takes power directly from the vehicle’s OBD2 plug.
• Quantity: 1 set(1 OBD 2 V1.3 interface and 1 CD)
• Package: well-packed
• Brand new and unused

Software included:

• EasyOBD v.2.2 freeware
• Digital Dash 5 (A Free CarPC Frontend that includes OBDII functions and monitoring)
• OBD2Crazy 1.51 freeware
• Putty 0.60 (Terminal program for Windows that allows you to send ELM AT codes directly to the unit!